B16 fuse cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a screw down cover for an standard B16 fuse. Other B16 fuses might fit as well. Check dimension in drawings.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a screw down cover for an B16 fuse. It is likely other B16 fuses can be used as well because of standardization. It covers the side of the fuse and its terminal. It has extra space to fit a lamp terminal to connect the non fused wires. The cover has one inlet and one outlet suitable for cables with up to a diameter of 8mm.
I used the cover to mount a fuse under my desk for my bench equipment.
CAUTION:
Work on a mains electrical circuit should only be executed by trained professionals. Working on the electrical mains is extremely dangerous and can result in electric shock, burns, arc flashes, fires, or explosions. Such risks can cause severe injury, permanent disability, or death. This type of work is not suitable for hobby or untrained use.
Print instructions:
No supports needed
Recommended layer height 0,2 mm
Caution, the part is prone to warping.
I would be happy to see some of your makes posted :)
Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.