1 / 1
BearExxa X-idler (5mm 20T-idler)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For use with idlers with the following specifications: 5mm bore 18mm flange 9mm width Changes made to the original the…
- Ocena
- 4 / 5
- Polubienia
- 12
- Pobrania
- 89
- Wydruki
- 2
- Wyświetlenia
- 561
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (19)Powiązane
This has been made for use with common 20T 5mm-bore idlers with the following dimensions:
- 5mm bore
- 18mm flange
- 9mm width (6mm belt)
Changes made to the original the parts:
- Upsized the bore to 5.04mm, same as the E3D-idler design (from 3.07mm)
- Upsized the chamfered-area around the holes to 7mm (from 5.5mm)
Credits
Adaptation based on the BearExxa as created by Grégoire Saunier. Created using the 1.0.0 BearExxa source files.