Karcher vacuum hose mount (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tested with my WD3 Premium, but it may work with any Karcher hose with the same style of tip. Several versions with…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 682
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Tested with my WD3 Premium, but it may work with any Karcher hose with the same style of tip.
Several versions with angles (45° and 90°), inline (short/long), and the parametric Fusion 360 file to modify it as you wish.
Careful, the short version let the hose go past the screwable mount.
It's the one I printed because it was going to a piece of 21mm plywood with a 35mm hole in order to hold the tip.
Print Settings
Resolution: .28mm
Infill: 20%
Filament: Dailyfil PETG Black
Notes:
You will need support for the angled ones.