Karcher vacuum hose mount (parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tested with my WD3 Premium, but it may work with any Karcher hose with the same style of tip. Several versions with…
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 82
- Makes
- 0
- Views
- 682
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Tested with my WD3 Premium, but it may work with any Karcher hose with the same style of tip.
Several versions with angles (45° and 90°), inline (short/long), and the parametric Fusion 360 file to modify it as you wish.
Careful, the short version let the hose go past the screwable mount.
It's the one I printed because it was going to a piece of 21mm plywood with a 35mm hole in order to hold the tip.
Print Settings
Resolution: .28mm
Infill: 20%
Filament: Dailyfil PETG Black
Notes:
You will need support for the angled ones.