Print-in-place Automatic Rope Tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
- No additional hardware or glue required --- Locks automatically after removing slack from tentlines, tarpline
- Ocena
- 4,778 / 5
- Polubienia
- 585
- Pobrania
- 4437
- Wydruki
- 30
- Wyświetlenia
- 11 671
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Print-In-Place with no additional hardware required, making it's easily scalable up or down.
All of the credit for this design should go to the original designer:
https://www.printables.com/model/565344-automatic-rope-tensioner
I've just made a cosmetic remix of the Automatic-Rope-Tensioner (filled in the screw holes, as they're not required).
Both this version and the original can be Printed-In-Place using organic supports.
I sliced it in PrusaSlicer using a 0.25mm layer height; 4 walls; 20% infill; organic supports on build plate only.
I've also tried printing it scaled down to 70% and as you can see, it works quite well (the locking mechanism moves a bit rougher though). With it scaled down to 70%, it's a very nice size for using with 550 paracord (it's actually way smaller & lighter than a NiteIze).