Dometic Heki 3 Mounting Brackets (Various Sizes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dometic Heki 3 Mounting Brackets
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
The mounting brackets that shipped have “feet” that are too short for my install, and I needed slightly longer ones that don't exist.
The 30mm x 30mm version is the same size as the original bracket. The other versions are taller and/or wider. Just FYI, If you go above 35mm wide it interferes with the edge of the internal Heki frame. This was a non-issue for me, but probably isn't for most people.
I printed mine out of PC for strength and high glass transition temp, with 30% triangular infill, and they are plenty strong. Would not print out of PLA. PETG would probably be ok.
Along with the models, I included the Fusion 360 file. If you something taller or longer, just open that file, click “Modify” > “Change Parameters”, and adjust the height or length as desired. Then right click on “Body 1” > “Save as Mesh” to generate the STL.
Note: If you print versions taller than 30mm you'll need to get new screws.