Flite Test Super Bee Nacelles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FT Super Bee Nacelles - Better than the foam ones
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
FT Super Bee Nacelles.
I was tired of having to cut out more foam for power pods after a crash. Using these, I have no issues except for the occasional bent prop.
This printed fine without supports. Just remove the integrated support prior and glue up.
The mounting holes on the firewall are 19mm apart. Prior to printing, check which side the motor wires will enter the nacelle. Otherwise, you will have to wrap around like the last picture posted. The default has the wires going to the top right. Mirror the files if you need them to go to the top left.
This is my original design. It is not reuploaded from another website; however, is was originally posted to Thingiverse: https://www.thingiverse.com/thing:3375890