Stihl BGA 57 blower wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stihl BGA 57 blower wall mount
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 167
- Wydruki
- 0
- Wyświetlenia
- 1058
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stihl BGA 57 blower wall mount. Several years ago a found one off another site. I did not like the fit and tried to re-mix it. After fiddling around with it, I decided to create one from scratch. I did this mostly the old school way with paper, then cardboard templates and quite a few test prints. I finally achieved a version that I liked. In this version, I used just two mounting holes, but you can modify the STL or STEP file for your own needs.
I designed the mounting holes around a particular screw I was planning on using to mount it to the wall. The distance between the holes was chosen due to existing mounting holes/plugs in our garage. And note, I originally designed the mounting holes using this YouTube video tip to avoid supports, but I found that using Fusion Hole command worked just fine.
This model took about 1 hour to print on a Prusa MK4 using “0.20 mm Speed” and Input Shaping enabled. I printed this in PLA, but I might make another print using PETG.
If interested, here are the parameters that I used in Fusion 360.
If you find this item useful, please consider making a donation of any amount the Phelan McDermid Syndrome Foundation (PMSF) under AudienceOfOne:
Thanks, AudienceOfOne