Stihl BGA 57 blower wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stihl BGA 57 blower wall mount
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 166
- Makes
- 0
- Views
- 1,052
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stihl BGA 57 blower wall mount. Several years ago a found one off another site. I did not like the fit and tried to re-mix it. After fiddling around with it, I decided to create one from scratch. I did this mostly the old school way with paper, then cardboard templates and quite a few test prints. I finally achieved a version that I liked. In this version, I used just two mounting holes, but you can modify the STL or STEP file for your own needs.
I designed the mounting holes around a particular screw I was planning on using to mount it to the wall. The distance between the holes was chosen due to existing mounting holes/plugs in our garage. And note, I originally designed the mounting holes using this YouTube video tip to avoid supports, but I found that using Fusion Hole command worked just fine.
This model took about 1 hour to print on a Prusa MK4 using “0.20 mm Speed” and Input Shaping enabled. I printed this in PLA, but I might make another print using PETG.
If interested, here are the parameters that I used in Fusion 360.
If you find this item useful, please consider making a donation of any amount the Phelan McDermid Syndrome Foundation (PMSF) under AudienceOfOne:
Thanks, AudienceOfOne