Mini Rod for IKEA KLEPPSTAD Wardrobe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Goes on the exterior or interior. Use it for hanging things, or whatever.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is for making use of the extra space on either side of my new kleppstad wardrobe from IKEA. It could also be used on the inside with a similar or same screw as the ones used to mount the rod that comes with this wardrobe.
I used 2x small screws from a package of IKEA screws and a couple of M5 40mm socket head cap screws and a matching nut. Probably only need about a 35mm one or smaller.
In order to make it stronger I printed it laying flat and I made a version of the model that is flat on the side to allow for this. You can also print it standing if you need it to look cleaner. But beware that it may break under load along the print lines unless you have very good layer adhesion.
My print is in PETG, don't mind the messiness on mine, this is due to my print settings not being perfect and I just needed to make a quick part before it got too late in the day to complete the work.
Enjoy!