VORON BTT Smart Filament Sensor SFS 2.0 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mod to mount a BTT SFS 2.0 in the exhaust filter housing.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 325
- Wydruki
- 4
- Wyświetlenia
- 3119
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
2 Versions:
Version 1: Printed parts: 1x exhaust_filter_housing_sfs2.0.stl.
The sensor is only held in place by the PTFE-coupler. I noticed it's stable enough this way. No additional hardware required.
Version 2: Printed parts: 1x exhaust_filter_housing_sfs2.0_screws.stl; 1x sensor_mount.stl
The Sensor is held in place with 3 M3x6mm screws (included with the sensor). The mount needs 2 M3x5x4 Heatset inserts (standard Voron-spec) and 2 M3x8mm SHCS to be mounted on the exhaust housing.
This model is based on the original Voron 2.4r2 exhaust filter housing, but inspired by this mod for the SFS 1.0: VORON smart filament sensor MOD for 2.4 R2 by MacLakey