Creality K1 Max side mount lid holder for standard M3 fasteners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a side mounted lid holder designed for the top glass lid of the Creality K1 Max printer using standard M3 bolts
- Ocena
- 4,667 / 5
- Polubienia
- 29
- Pobrania
- 327
- Wydruki
- 3
- Wyświetlenia
- 2420
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a side mounted lid holder designed for the top glass lid of the Creality K1 Max printer. It is deep enough to support the use of normal socket head cap screws, and not the low profile type that is much less common to have on hand. The depth of the countersink is 3.5mm for full height M3 fasteners without hitting the glass on the fasteners. Be aware that the fasteners cannot go too deep, or else they will hit the Z axis carriage and cause a crash. Look inside to make sure that once installed the fasteners are flush with the threaded holes.
Solidworks 23 part files added incase you wanted to mess with it. Nothing special, just a basic design.