Silikon-mold for Tire for a sg90
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tire and wheel for the mini pushing bots. You will need 3 m3x30 screws (or longer) and 3 m3 nuts to assemble the mold,…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Tire and wheel for the mini pushing bots.
You will need 3 m3x30 screws (or longer) and 3 m3 nuts to assemble the mold, and 2 component silicone and possibly some release agent or petroleum jelly, but the latter its not necessary. Assemble the entire thing and fill it with some silicone. After hardening you can unscrew it an take it apart to pull out the new wheel directly together with it's tire. You will probably need pliers for disassembly. Slowly work your way out of the mold and trim the access material with a scissor or a cutter. Your new and much grippier wheel is ready to push:)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
100
Filament: PLA PLA your choice
Category: R/C Vehicles