1 / 3
72' Centerbeam Flatcar
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HO scale 72' centerbeam flatcar model with standard beam
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 271
- Wydruki
- 3
- Wyświetlenia
- 1092
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 3) (Komentarze: 5)Remiksy (0)Kolekcje (47)Powiązane
These cars are common to North American railroads, often seen transporting lumber or similar materials. This model will work great with a load such as this one. Print the following parts:
- 2x Divider
- 1x End 1
- 1x End 2
- 1x Floor
- 1x Top Beam
- 1x Underbody
- 2x Side rail
- 2x Ladder
- 1x Brake Air Cylinder
- 1x Brake Control
- 1x Brake Control Unit
- 2x Coupler Cover
Hardware:
- 4x M2x4 screws
- 2x Couplers
- 2x Trucks with wheels
- Glue
Instructions:
- Glue the two dividers together
- Glue the step 1 assembly into the top of the floor
- Glue the two side rails to each side of the step 2 assembly. Make sure the side rails are facing outwards.
- Glue the ladders to end 1 and end 2
- Glue both of the step 4 assemblies to each side of the main assembly
- Glue the Top rail to the top of the assembly on top of the dividers, end 1, and end 2
- Glue the underbody to the underside of the assembly. Make sure the coupler holes are aligned.
- Create a coupler assembly with the coupler cover, M2x4 screw, and a coupler
- Screw in the step 8 assembly into the main assembly. Make sure the coupler cover is facing the correct direction.
- Screw in the two trucks using the M2x4 screws