1 / 3
72' Centerbeam Flatcar
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HO scale 72' centerbeam flatcar model with standard beam
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 271
- Makes
- 3
- Views
- 1,092
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These cars are common to North American railroads, often seen transporting lumber or similar materials. This model will work great with a load such as this one. Print the following parts:
- 2x Divider
- 1x End 1
- 1x End 2
- 1x Floor
- 1x Top Beam
- 1x Underbody
- 2x Side rail
- 2x Ladder
- 1x Brake Air Cylinder
- 1x Brake Control
- 1x Brake Control Unit
- 2x Coupler Cover
Hardware:
- 4x M2x4 screws
- 2x Couplers
- 2x Trucks with wheels
- Glue
Instructions:
- Glue the two dividers together
- Glue the step 1 assembly into the top of the floor
- Glue the two side rails to each side of the step 2 assembly. Make sure the side rails are facing outwards.
- Glue the ladders to end 1 and end 2
- Glue both of the step 4 assemblies to each side of the main assembly
- Glue the Top rail to the top of the assembly on top of the dividers, end 1, and end 2
- Glue the underbody to the underside of the assembly. Make sure the coupler holes are aligned.
- Create a coupler assembly with the coupler cover, M2x4 screw, and a coupler
- Screw in the step 8 assembly into the main assembly. Make sure the coupler cover is facing the correct direction.
- Screw in the two trucks using the M2x4 screws