LayersFactory
Zgłoś model
1 / 6
Heltec Wireless Stick Lite v3 (WSLv3) case for Meshtastic — zdjęcie 1
1 / 6

Heltec Wireless Stick Lite v3 (WSLv3) case for Meshtastic

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TonyG

@TonyG

This is a case for the Heltec v3 Wireless Stick Lite v3 boards, designed with the Meshtastic project

Ocena
5 / 5
Polubienia
132
Pobrania
1623
Wydruki
10
Wyświetlenia
11 835
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (45)Wydruki i komentarze (Wydruki: 10) (Komentarze: 20)Remiksy (0)Kolekcje (149)Powiązane

**You can purchase this case and others already printed:**

US customers can purchase from QuantumShadow3D:
(https://www.etsy.com/shop/QuantumShadow3D)

UK/EU customers can purchase from 3DChicken:
(https://www.3dchicken.co.uk)
 

These models are intended for personal use only.
DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission.

Anyone interested in licensing this design for non-commercial (i.e. private) sale can message me here to discuss.  Please respect the Creative Commons license restrictions I have chosen (http://creativecommons.org/licenses/by-nc-nd/4.0/) and I encourage anyone who sees my designs for sale contact me.

With all that said, now on to the models…
 

Update 13 Apr 2024:

  • Updated nearly all models:
    • Frames and back covers now support battery size of 103665 (similar to MakerFocus 3000mAh lipo pack)
    • Multiple thickness options for back covers

 

This is a case for the Heltec Wireless Stick Lite v3 (WSLv3) boards, designed with the Meshtastic project in mind (https://meshtastic.org).

There are five models required for a complete case, as well as socket head cap screws and a SMA antenna pigtail cable; refer to the parts list below.

Required hardware:

  1. Four (4) M3x20mm socket head cap screws
  2. Four (4) M3 nuts
  3. Battery: 18650 cell (protected cells are highly recommended for safety!) or flat lithium polymer type.  Flat lithium ion battery compartment maximum dimensions: 70mm x 28mm x 16mm (LxWxH).
  4. Two (2) momentary micro push buttons (for user button and reset button): https://amazon.com/gp/product/B07C7211PJ

Optional hardware:

  1. GoouuuTech GT-U7 GPS module (ublox NEO-6M chip) or similar size GPS module: https://www.amazon.com/Navigation-Positioning-Sensitivity-Consumption-High-Precision/dp/B08MZ2CBP7 (also available via Ali Express)
  2. 3-pin on/off two-position panel mount slide switches for GPS and/or power: https://www.amazon.com/gp/product/B06XFXWLJP

Minimum required model files:

  1. Heltec-WSLv3_front-<pattern>
  2. Heltec-WSLv3_back
    +OR+ Heltec-WSLv3_back-18650
  3. Heltec-WSLv3_frame-noSwitch/GPSswitch/powerSwitch/powerSwitch-GPSswitch
  4. Heltec-WSLv3_button-plate (requires two; one each for user button & reset button)

Tagi

esp32lorahelteclora32