My Adaptors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this to build yourself adaptors for different hose sizes. Variables for customizer: $fn - defines how smooth the…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 154
- Wydruki
- 0
- Wyświetlenia
- 946
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Use this to build yourself adaptors for different hose sizes.
Variables for customizer:
*$fn - defines how smooth the curves are. Higher values are smoother, but take more processing effort. Max value is 360. Default is 200.
*fit - is how well you want the fit, 0.5 mm is a snug fit.
*wallThickness - is how thick the walls are of your adaptor.
*topSectionSize - is the diameter of the upper part of the adaptor, this should match your actual hose size, the fit is subtracted from this.
*bottomSectionSize - is the diameter of the lower part of the adaptor, this should match your actual hose size, the fit is subtracted from this.
*topSectionHeight - is how tall the top section will be.
*midSectionHeight - is how tall the middle section, that joins the top and bottom sections, will be.
*bottomSectionHeight - is how tall the bottom section will be.
Sample .stl file is 63mm wide top section 80mm high with a 50mm high mid section and a bottom section of 100mm wide and 60mm high.
Category: Other