Liczymy pasujące modele…
My sprinklers were all very overgrown with grass so I made a 3" hole saw to help clear out the area. You put a 1/4-20 bolt in the center and use a nut to hold it in place. It does a good job of breaking up hard dirt and grass around the…
Vrstva 0,16mm, 45% výplně, materiál ASA. 6mm vratový šroub, pružina, podložka a křídlová matice. _______ Layer 0.16mm, 45% infill, ASA material. 6mm gate bolt, spring, washer and wing nut.
An unusual chip extraction attachment - screwed underneath, to the foot, for edge work. Typical top extraction (i.e. between the milling machine and the foot, pulling the chips upwards) do not remove the spoil well when working with a…
Simple Easy to Print Solder Fume Extraction for 120mm fan Print uprights with no supports. Carbon filter can be added using additional housing between the fan and extractor.
Simple connector, might need a spacerbetween it and the wall
What is Hextraction? Tile description and rules: These two tiles can trigger any roll-through effect tile. The Trigger Tile works only on adjacent effect tiles while the Board Trigger Tile covers all effect tiles on the game board. Now,…
Simple Easy to Print Solder Fume Extraction for 80mm fan Print uprights with no supports. Carbon filter can be added using additional housing between the fan and extractor.
TL;DR This is a variant of a Flip-Flop tile for the 3D-printed board game Hextraction . The main feature is that it can be rotated, so it can be used on the whole board Print recommendation: Nozzle : 0.4mm Layer height : 0.2mm Perimeters…
This vent is mounted in a blanking plate in a window opening to typically exhaust fumes from a 3D printer and interfaces to a 120mm fan or duct. 2 design variants are included Thread insert version 4mm thread, 4mm deep 3.3 mm hole for…
Since DeWalt doesn't have an affordable drill dust shroud I made one myself. It works with DeWalt vacuums, but an ordinary one would still be fine. The cutout for the drill is 30x30mm. For lower power vacuums you need to make the cutout…
Welcome to the Space Silo Space Silo is an original, 3D-printable tabletop game designed for zero-waste printing and high-stakes fun. Perfect for family game night or as a STEM counting tool! The Mission Extract modular fuel cores…
Compatibility: Any 120mm fan with 105mm mounting hole spacing should fit. I'm using a Noctua NF-F12 industrialPPC-3000 PWM, but you're not locked into that. The fan mounts to the baseplate using two thick self-tapping screws that cut…
This adapter allows you to connect the FANZWORK extraction hood for angle grinders with the Bosch Click & Clean system. The adapter is eccentrically positioned to provide as much space as possible for your fingers when gripping. Printed…
The adapters from the exraction systems are usually too short. This adapter acts as a connector. Dimensions: Thicker part: 62 mm Thinner part: 57.5 mm Length: 80 mm Print with 100% filling Just print and have fun! Check my other posts…
An adapter to connect a shopvac with a 45mm OD hose to the generic 90L desktop sandblasting cabniets. I have tested on a Pollor brand cabniet but when I ordered this one there are lots of other brands selling what looks to be the same…
This is a linking piece needed to make the board wider, assuming a standard height (or slightly taller) board. Works with all Hextraction boards.
Inspired by the original Festool jig. Unfortunately, the tool is not available for the Festo OF 1000, so I redesigned it. If the cap is difficult to turn, a drop of oil helps. Inspiriert von der originalen Festool-Vorrichtung. Leider ist…
I love the original idea, and the main design of the lamp, but I improved the look. For the best look two filament changes are recommended. (The photos show the tile printed scaled down to 80%, since my whole Hextraction set is 80% scaled…
This frame and spacer ring set allows you to put some additional fans to help pull hot air out of a computer with top mounted radiator. Any 120mm fans should work, but its designed for AC Infinity AXIAL LS1238. 360mm is larger than the…
I designed this off the original Mimaki printer fitting. I included additional screw holes to help allow to angle the fitting a bit more to accomodate my extraction system. It's my first design, and probably will need a tweak, but all the…
Disclaimer If you are not confident with tackling mains powered projects seek professional advice. I am not liable for any issues that may arise from incompetent or unauthorized wiring practices! Fan The fan was purchased from Aliexpress…
My Dad asked me to make an extraction Box which he could use to extract fumes whilst soldering. Box Dimensions: Length 120mm Width 50mm Height 23mm (25mm With lid) Spout is 30mm in length and 43mm in diameter (outside) 40mm (inside) Can…
This is a revised design of my original to better accomodate a 100mm ID PVC pipe fitting. I also revised the vertical attachments from the base to the elbow. This is designed to accomodate my other design of a “T” piece with 100mm PVC…
This T Piece junction will accomodate a 100mm ID PVC pipe. It is designed to be used in conjunction with my other design of a 90 degree elbow and fit 100mm ID PVC pipe and/or a 100mm flexible hose. The other design is here:…
I've printed the adapter for the jigsaw in TPU because it's flexible. Print settings: - 4 layers bottom - 4 layers top - Nozzle: 0,4mm - Layer height: 0.2mm -Infill: 25% Concentric Please download the model, print it and give me a like.
Changing the genuine adapter of the saw with a new one that fits a Parkside vacuum cleaner hose (35 mm)
I bought the Jrready Molex Microfit tools for working on ma Voron printer. I liked the idea to create a case like kyleisah did. But his case is a little to tall in my opinion. I think that is because of the minimum height of the rugged…
This custom cover transforms a standard PC fan into a useful tool for soldering by directing the airflow to absorb fumes
It is made for the common DN 50 Tube System. You need a seal for the side where the tube comes in.
I needed specific angled connector pieces for my in-house mechanical ventilation. Since the original parts were made from ABS, I decided to design and print the pieces; I have made a variation of adapter pieces (please visit my account)…
I needed specific angled connector pieces for my in-house mechanical ventilation. Since the original parts were made from ABS, I decided to design and print the pieces; I have made a variation of adapter pieces (please visit my account)…
I needed specific angled connector pieces for my in-house mechanical ventilation. Since the original parts were made from ABS, I decided to design and print the pieces; I have made a variation of adapter pieces (please visit my account)…
no supports needed for any thing if you wnat to print a spacer then you sould print multipul so that it comes out better. you may need to shrink or enlarge the tile so it fits on your game board.
My sprinklers were all very overgrown with grass so I made a 3" hole saw to help clear out the area. You put a 1/4-20 bolt in the center and use a nut to hold it in place. It does a good job of breaking up hard dirt and grass around the…
This custom-designed tool slide integrates a Dewalt Trim Router Plunge Base with a Festool track, allowing for precise and adjustable cuts along the track’s length. This design is perfect for cutting custom-width grooves by adjusting the…
A fume extraction spacer for an AnyCubic Photon Mono X2. The rectangle design is designed to use this round to rectangular elbow. For the full fume extractor, I have this setup in this order: Elbow Elbow to 120mm Fan Adapter Arctic P12…
Introducing the Dicey Destroyer Tile! When the trigger gets activated, roll a six-sided die and destroy the tile adjacent to the number that was rolled. If the space that was next to the number is empty, destroy the dicey destroyer tile…
Original Model Description by Zach Freedman When nothing remains, everything is equally possible. Dump your hand with this simple utility tile for Hextraction, the hackable, 3D printable board game. I developed this as an example of a…
Credits: First I have to give credits to Ifixit for the idea of the fume extraxtion device. They made a tutorial and listed up all the components you need and how to wire them. So check their article if you want another explanation…
Print this remixed 5.1" elbow adapter, then everything from the original model excluding the original elbow: QIDI Q1 Pro Exhaust Duct and Fume Extraction Port With 90 Degree 3" Swivel Elbow
This is a tool which can be pressed or gently pounded into a 1.5" IPS bath / shower drain to facilitate removal if you don't have a tub drain removal wrench tool or if the legs to which a standard tool attaches are rusted through, broken,…
PARKSIDE Router POF 1200 D3 Replacement for the original dust extraction adapter. Printing information The STL file ist correctly aligned. Layer height: 0.20 Perimeter: 3 Infill: 25% Support: none Brim: recommended I am looking forward to…
Converts original high pressure low volume foot to high volume low pressure on 100mm extraction hose. Fits to original pneumatic actuators. Aluminum reinforcement plates to take the load off the 3d print.
Clip-on dust extraction for Festool MFT/3 Multifunction Table with holes for 4x workbench dogs pin storage. It simply slides in the table rail and holds the special air suction from the dust extraction nozzle where you need it allowing…
Converted Lid to accept 5x2mm magnets to keep closed
What came first?: Trigger Chicken - Place a chicken on one of the shooting ramps blocking its access. If a chicken has already been created, you may change the posistion. Trigger Egg - Roll an additional egg ball for your turn. Printing :…
This is an adapter to connect a regular Henry vacuum cleaner to the dust extraction of an Inca bandsaw with a ~53mm port. Mine is a 1980s “Euro 260” model, but I assume they all have the same port. v4 is the original version and which I…
This is a custom vacuum adapter designed for the Bosch PST 650 jigsaw. It allows you to connect a dust extraction system to reduce sawdust while cutting, improving visibility and keeping your workspace cleaner. I fitted it to my 31,5mm…
This is a bracket for mounting a cheap extraction device from China for a BF20 milling machine and others. The Freecad construction drawings are included. It is important that you adapt the holes for mounting on the milling head and the…
Convenient for removing dust when cutting tiles directly. Suitable for 125mm diameter disc May not fit all angle grinder housings Printing with supports Layer - 0.2 4 walls Filling 25%
The Loss of traction Tile for Zack Freedman's Hextraction. This tile is my original creation to throw some more chaos into the already chaotic game.
Most of the credit for these designs should go to ZackFreedman and Inaudable from Thangs. Thank you to you both for this fancy Hextraction board! This remix was started with just making a custom goal with (in my opinion) clearer symbols.…
This is a small collection of physical rules cards for the game Hextraction. These cards are intentionally a different size/shape than the special tiles rule cards, so that they can easily be distinguished from them. They do maintain most…
it Uses 4 M4 screws with nut the effective diameter is 78 mm An 80 mm tube with metal band fits perfectly
Hello, This was definitely not my idea, but what was available didn't quite suite my needs so I completely redrew a set of my own with some upgrades and went a bit crazy haha! This design is based on 3x10mm round magnets (Amazon afilliate…
A creative trap tile with an 8-bit Mario theme. After trapping the first ball, a path opens with a cool flip down ramp - giving players a 1up! This tile is a remix of @andrewtho5942's original model from Thangs.com. Printing: The…
For attachment to a wooden board or other object that prevents fresh air from entering the room
Print two parts oriented as shown on picture; use “strength” profile; enable standard supports on build plate only; scale to 100.3%. After printing superglue both parts. If they don't fit tightly, reprint smaller part with adjusted scale.
Flip your game on its head with this wild mechanical tile for Hextraction, the hackable, 3D printable board game. Like the traditional Japanese water feature, the Sozu Tile has a unique threshold mechanic - the first ball to enter gets…
Vrstva 0,16mm, 45% výplně, materiál ASA. 6mm vratový šroub, pružina, podložka a křídlová matice. _______ Layer 0.16mm, 45% infill, ASA material. 6mm gate bolt, spring, washer and wing nut.
Remplacement du déflecteur de la scie à onglet Metabo KGS 216 M qui n'est plus disponible comme pièce de rechange (n° 41 Extraction channel selon liste de pièces Metabo pdf). Visitez également mes trois autres modèles de pièces de…
We bought a Bosch router table that has two dust collection ports, but one of them is just a hole without a flange to attach the hose. This adapter covers up the hole and provides a hose clamping point. One of the photos shows it in…
The dust extraction on this evolution saw leaves a lot to be desired. This cover helps the taller cuts in particular.
Happy Easter! It's time to go egg hunting in Hextraction, with the Egg Basket tile. This tile, while being a temporary roadblock, allows you to search up any tile to replace it with when it's destroyed, or immediately if you manage to…
This tile sends your board into a Mirror Universe! TRIGGER: Starting with you, each player draws a tile which gains "Overwrite anything" and plays it. Ignore On Play effects. Then destroy this tile. For multicolor printing, swap filaments…
These files are for creating your own Hextraction tiles and cards using FreeCAD. They were created with FreeCAD 1.1 and the Dynamic Data add-on. v2: Corrected a few measurements, and added some basic tile examples. v3: Added more example…
Extraction for a 3018 CNC fixture Bracket for 20mm corrugated tube Fastening to the milling head with two M3 screws. You need to drill and tap the holes. You can also use small self-tapping screws. The small part fixirt the hose from…
It's an extraction mounting system which makes connecting and disconnecting your Bambu P1S from your ducting Waaayyyy easier than screw and magnet fitted alternatives. Got your printer sat on a shelf or worktop and the air extraction vent…
Conduit découpé en 2 parties pour pouvoir s'imprimer sur des imprimantes de taille plus modeste
Trigger: if 3 balls are inside, destroy this and 2 tiles each in direction of arrows (5 total, including itself) note: if it is destroyed any other way, nothing happens. it is a bit of a tight fit in the board, planning to make a rules…
A simple model to connect a 75mm vent hose to a Litter Robot 4. I cut out the handle on the back and put a bracket around it then the adapter just hangs on that and can be held with some optional magnets. The adapter is bolted to the back…
Base and hose adapter are printed in PLA or PETG Hose Unit is printed from TPU 95 The base and hose adapter are glued together. The section of the hose adapter that inserts into the base is 31.75mm (1.25") in ID and 38.1mm in OD if you…
Nozzle for sawdust extraction. Designed for a 100mm hose. Print instructions No supports needed. Tested with PETG Brim 5mm Resolution 0.2 mm Infill 20%
Since i often use Octoprint, i don´t want to allways be at the Printer to Extract the Filament via the Printer Menue. Additionally, it seems like since i change my hotend to a different one, the autoextrude doesnt extract the Filament to…
Fan System This fan system is dimensioned to replace the glass rear top panel of the official enclosure, but it can be used with any compatible enclosure. Operation With the doors fitted the valves are open and chamber air is filtered and…
An unusual chip extraction attachment - screwed underneath, to the foot, for edge work. Typical top extraction (i.e. between the milling machine and the foot, pulling the chips upwards) do not remove the spoil well when working with a…
Makita router attachment (RT0701C series) for bottom dust extraction. An unusual chip extraction attachment - screwed underneath, to the foot, for edge work. It covers the cutter and its work area, extracting dust directly from the place…
"Laser cutter extraction adapter" -Slim and Medium vor Atomstack Laser
This 3D-printed attachment mounts directly to the top of the XTool D1 Pro Laser Head and allows for effective smoke extraction without needing an enclosure. That’s a huge benefit, especially when using the extension kit — it saves a lot…
A simple refillable GZD 1925 activated charcoal filter unit for various kitchen extraction hoods, in my case an old Electrolux Modell 404033. New original filters currently are ~13€/piece plus shipping and last roughly two months,…
This is Bowty's King Tile Remix of Zack Freedman's King Tile but with the addition of my original Rules Card.
This is a remix of the Heygears Reflex RS RefleXtractor by @Jerry_Lee to make use of 3in/80mm diameter hoses. The model was remixed to be smaller, easier to fit on most print beds, and printable in one piece. A few fitment tweaks were…
Protože jsem nikde nenašel alternativu nebo možnost koupě redukce k odsávání na pracovní stroj který vlastním, tak jsem vytvořil vlastní..A to na běžný vysavač Parkside vs pásová a čelní bruska na dřevo Holzmann BT 1220..Sedí přesně…
Simple design to allow the vent at the back of the K1(C) to vent to an open window using 100mm standard ducting. The connection to the K1(C) fits over the top of the original carbon filter and designed to give as much room behind the…
Tile can be put in 2 positions with “main” passage going diagonally and activation passage vertically or main passage being vertical and activator to the side. Printed with layer height 0.2mm. Used 25% infill in spinner for better…
I recently purchased the excellent XtraHand from DrillBuddy UK but I wasn't entirely happy with the provided adaptor to connect it to my Festool CTL Midi dust extractor. So I created my own version using Fillamentum Fillflex 98A TPU. The…
Simple tool to extract rivets from the Core One. Just slide over a rivet to extract it. Prints well at 0.15mm or 0.20mm with either a 0.4 or 0.6 nozzle. Tested with both PLA and PETG.
Problem with layers due to using old Chinese filament. I used supports for the center part..I recommend printing slower.
This custom window spacer is designed for Klarstein AC units to solve the problem of wide windows. The spacer slides directly into the existing hose holder, providing a secure, snug fit that can be further reinforced with screws through…
Flexible Vacuum Adapter for Optimill BF16 and Kärcher MV2 Vacuum Cleaner. Mounted on existing Screw on the Millinghead. You have to be careful when snapping the segments together not to break them. I recommend to print this model in PetG…
Update 2025-10-09: Fusion 360 Datei hochgeladen --------------------------------------- Absaugadapter zur Verbindung eines Bosch GSS 12V-13 Akku-Schleifers mit dem osVAC neo System. Seite 1: Bajonettanschluss osVAC neo M32 Seite 2:…
Use 0.10mm layer hight and pause the print at 7mm to insert the magnet.
A smoke extraction adapter for Sculpfun icube. To connect a 44mm internal pipe. You can use the originals screws for install it. I have print it in PETG with 0.4 nozzle.
Follow the instructions in @FabioRosi_3160168 's remix ( https://www.printables.com/model/1267499-sky-team-organizer-with-lids-for-vertical-storage ), but print the file box-1-modified.stl instead of box-1.stl
