Ikea Bittergurka Planter Drainage Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inserts for the Ikea Bittergurka planter to allow better drainage.
- Ocena
- 4 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 404
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
The Ikea Bittergurka planter is a nice and simple planter that I wanted to use on my window sill for herbs. Unfortunately, it doesn't have drainage so I decided to make my own inserts with feet to allow drainage. Note that each planter fits two of my inserts and there's a gap between the two planters. I did this on purpose to allow excess water to evaporate and lets me take the inserts out more easily.
You can print it as is or turn on vase mode. The vase mode worked fine for my 0.6mm nozzle with PETG. The walls weren't very straight but it was strong enough and it doesn't matter as long as it can hold soil in. You need to print 4 legs per insert. The insert should be rotated so the side with the holes is on the bed. The legs can be superglued in if the fit is too loose.