Filler filament holder PAX mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IKEA PAX screwless mount for Filler filament holder
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 957
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've discovered a model of screwless spool holder by RandumbPrints.
But I already had a Filler filament holder, so I've mixed them (rescaled, combined).
Printed mine from PLA, but I recommend PETG as it gets hot inside of PAX.
I recommend increasing the wall count to 3 or 4 for additional strength.
Printed it with inserts down with organic supports in PrusaSlicer and certainly don't recommend it. It works, rough surface is not visible, but it requires a lot of supports and takes time to accurately remove it without damaging inserts.
Try to print it vertically with a brim and organic supports to hold inserts.