1/4" NPT Male Air Hose Tool Hanger Quick Connect
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1/4 Inch NPT Male Universal Air Hose Quick Connect Adapter to Hang Air Tools
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 220
- Wydruki
- 5
- Wyświetlenia
- 1204
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This hanger works with any ¼" standard quick connect air hose male NPT. It holds (1) tool but can easily be modified to hold multiple in a single row.
I used PLA with anywhere between 15-30% infill. Did not see any structural differences in the part.
No supports needed.
0.2mm layer height on a 0.4mm nozzle.
This hanger has a flat top and rear, each with a recessed mounting hole for a single screw.
There is a sweep upward of the holding surface to ensure the tools does not easily fall out if bumped. See pictures for angle.
I have added a few fillets, radii, and material reduction from the original model to give it a bit more of a stylish appeal while removing many unnecessary sharp(er) edges.