1/4" NPT Male Air Hose Tool Hanger Quick Connect
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1/4 Inch NPT Male Universal Air Hose Quick Connect Adapter to Hang Air Tools
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 220
- Makes
- 5
- Views
- 1,204
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This hanger works with any ¼" standard quick connect air hose male NPT. It holds (1) tool but can easily be modified to hold multiple in a single row.
I used PLA with anywhere between 15-30% infill. Did not see any structural differences in the part.
No supports needed.
0.2mm layer height on a 0.4mm nozzle.
This hanger has a flat top and rear, each with a recessed mounting hole for a single screw.
There is a sweep upward of the holding surface to ensure the tools does not easily fall out if bumped. See pictures for angle.
I have added a few fillets, radii, and material reduction from the original model to give it a bit more of a stylish appeal while removing many unnecessary sharp(er) edges.