Cheshire Collimator (0.965", 1.25", 2.0")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Cheshire collimator, for aligning Newtonian telescopes. Comes in 0.965", 1.25", and 2.0" eyepiece sizes.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 226
- Wydruki
- 3
- Wyświetlenia
- 935
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Public Domain
A simple Cheshire collimator, for aligning Newtonian telescopes. Comes in 0.965", 1.25", and 2.0" eyepiece sizes. You can choose whether to print with or without an internal crosshair.
Also check out other telescope stuff.
Printing
Ideally, the eyepiece is printed in black, with the white label glued on. This should maximize the contrast between the eyepiece and label. However, if you don't want to use the label or you just don't have black, any color works fine. I did mine in bright red.
Print the attached PDF at 100% scale, and cut out the crosshair or blank for your eyepiece size. Be sure to cut out the hole in the middle, too! Then glue it to the inside diagonal of the eyepiece. This gives you a handy reflection while collimating!
How to Use
For information on how to use this, see this excellent introduction to telescope collimation by Gary Seronik.
Creation
I made this because I couldn't find one made to fit my ancient 0.965" Tasco TR11. Along the way, I figured I might as well make a version for the more modern eyepiece sizes, as well.