Eurocase Bridge - Mate Your Make Noise Skiff with Intellijel Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thing allows one to combine a Make Noise 104HP skiff with an Intellijel 104HP/7U performance case without…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 1072
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- GNU Lesser General Public License
This thing allows one to combine a Make Noise 104HP skiff with an Intellijel 104HP/7U performance case without destructively modifying either case. Simply replace the Make Noise side panels with the ones included in this thing, then slide the skiff into the Intellijel case using the mounting clips. Also, since the handle on the Intellijel case was too large for this modification, I included a wedge that mounts in the same spot. This provides more stability for plugging cables in and out of the skiff.
I have been testing this for over a month in my non-moving setup without any hiccups. I cannot say if this travels well, as I have not been mobile since modifying this setup. However, the modifications can be easily removed as they are non-destructive and use the original screws from both the skiff and case.
Note that I changed location of the power switch/inlet to the right side of the skiff to meet my needs. If you require anything different, feel free to download the .f3d file and modify the design in Fusion 360.
If you like this, feel free to buy me a cup of coffee...or if you are really generous, a bottle of bourbon. My Paypal link is somewhere on this page. Thanks!
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
No
Supports:
No
0.2
Infill:
50%
Filament:
Prusament PETG Clear
Notes:
I used PETG because it is a little stronger. PLA might be sufficient as well.
Category: Music