Connector for Trogen stairs and Malm bed drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevents IKEA Trogen stairs from slipping away from bed when toddler climbs up or down.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Your toddler is climbing up and down the toddler stairs, while those are slipping and you're scared, the toddler might fall due to this slipping? I say, no more! This model connects the Trogen stairs from Ikea to the fronts of Ikea Malm underbed drawers, so it cannot slip away from the bed.
Model
The model consists of two parts, both of which should be printed twice, once for each side.
- Part #1: Thing with rectangular holes
- Part #2: Wedge
They are printed separately a) to keep the main shearing tension perpendicular to the layer orientation and b) to be robust against minor design errors, as the wedge can be adjusted.
Assembly
After the print is finished, the wedge is inserted into the smaller hole. Then, the connector is placed under the drawer with the wedge behind the drawer front. Now, the back legs of the Trogen stairs are inserted into the oblong holes. Adjust the wedge positions if necessary.