Kallax (Not only) Skadis Side Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for Skadis and other perforated plates as hooks are changeable in positions
- Ocena
- 4 / 5
- Polubienia
- 24
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 1219
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello all,
as I needed space on my table and there was a 2x1 Kallax shelf next to it, it would be an ideal place to move the Skadis to its free side.
The 5-piece bracket fits 2x1 Kallax shelves and should also fit all other Kallax shelves that are placed horizontally.
The width of the centre part is the same as the distance between the Skadis holes so that 2 brackets can be placed directly against each other and are flush with the holes.
I wanted to keep the possibility open to use other panels or to hang something completely different there, so the hooks can be moved to both sides to a certain extent. The middle sections are open at the bottom so that maybe cables can be fed through if necessary.
The model file is in 3MF format so that the hooks can be adapted to other panels. The same applies to the spacer plug, as there are certainly manufacturing variations in the Kallax production so that the length has to be adjusted depending on the Kallax.
The 4-piece top screw set is for all Kallax shelves that are set up vertically, i.e. have the screws on top.
The hooks can also be adjusted in the positions so that other panels can be used.
The Skadis hooks should work with all colored Skadis Plates, probably also the “natural” ones.
All parts are in the correct printing position, no supports necessary
Printed with PLA+ ( SUNLU )
Layer: 0,2
Infill: 20%
Printing time for the large parts varies according to nozzle size