Sunglasses Case by StereoFreq
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A strong case to hold your favorite spectacles, or other stuff...
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
The .stl files are oriented in a way that allows the logo to be printed into each piece (top/bottom). To do this, print the logo first, with a .4mm nozzle and don't remove it from the print bed. Then, with the logo still on the print bed, print the top/bottom piece around it. This will make sure the logo is flush with the top/bottom surfaces. However, the logo can also be printed separately and glued into place.
Note: This was my first version. I'm working on another version that takes less turns to separate the two pieces. This version takes about 9 turns to screw/unscrew. lol Sorry about that; but hey, its' just extra secure!