Sunglasses Case by StereoFreq
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A strong case to hold your favorite spectacles, or other stuff...
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 65
- Makes
- 0
- Views
- 328
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Share Alike
The .stl files are oriented in a way that allows the logo to be printed into each piece (top/bottom). To do this, print the logo first, with a .4mm nozzle and don't remove it from the print bed. Then, with the logo still on the print bed, print the top/bottom piece around it. This will make sure the logo is flush with the top/bottom surfaces. However, the logo can also be printed separately and glued into place.
Note: This was my first version. I'm working on another version that takes less turns to separate the two pieces. This version takes about 9 turns to screw/unscrew. lol Sorry about that; but hey, its' just extra secure!