1 / 1
quick vase mode screw container with 1/3/4/5 compartments and a twist
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small parts container with dividers; you choose the number of compartments in the slicer with some vase mode magic
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 95
- Wydruki
- 3
- Wyświetlenia
- 494
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 3) (Komentarze: 8)Remiksy (0)Kolekcje (26)Powiązane
I needed a small container for some small parts (screws and nuts), so I added some dividers to my vase mode screw container. And then I thought of a way to let you choose the number of compartments (1/3/4/5) in the slicer with one model using some vase mode tricks instead of having 4 separate models.
There are models with 60mm and 80mm diameter (the photo shows the 60mm version).
I also made some mini tweezers to get the screws/nuts out.
Printing:
- Use vase mode of course.
- Set the extrusion width to 0.6mm. (in print settings → advanced)
- Choose the number of compartments by setting the slice gap closing radius (also there) to
- 0mm for 5 compartments
- 0.005mm for 4 compartments (as shown in the photo)
- 0.01mm for 3 compartments
- 0.02mm for 1 compartment (no dividers)