1 / 1
quick vase mode screw container with 1/3/4/5 compartments and a twist
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small parts container with dividers; you choose the number of compartments in the slicer with some vase mode magic
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 95
- Makes
- 3
- Views
- 494
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
I needed a small container for some small parts (screws and nuts), so I added some dividers to my vase mode screw container. And then I thought of a way to let you choose the number of compartments (1/3/4/5) in the slicer with one model using some vase mode tricks instead of having 4 separate models.
There are models with 60mm and 80mm diameter (the photo shows the 60mm version).
I also made some mini tweezers to get the screws/nuts out.
Printing:
- Use vase mode of course.
- Set the extrusion width to 0.6mm. (in print settings → advanced)
- Choose the number of compartments by setting the slice gap closing radius (also there) to
- 0mm for 5 compartments
- 0.005mm for 4 compartments (as shown in the photo)
- 0.01mm for 3 compartments
- 0.02mm for 1 compartment (no dividers)