TempTowers PLA/PETG/PA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TempTowers adapted for BambuStudio for PLA/PETG/PA
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 422
- Wydruki
- 3
- Wyświetlenia
- 1338
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I adapted stoempie's model from thingiverse for Bambu Studio.
would also work for PrusaSlicer, just add the following code in PrusaSlicer under:
Printer Settings → Custom G-code → Before layer change G-code
maybe i will also adapt it for prusaslicer when i need it next time
; for PLA
;TEMP TOWER
{if layer_z <= 10} M104 S185
{elsif layer_z <= 20} M104 S190
{elsif layer_z <= 30} M104 S195
{elsif layer_z <= 40} M104 S200
{elsif layer_z <= 50} M104 S205
{elsif layer_z <= 60} M104 S210
{elsif layer_z <= 70} M104 S215
{elsif layer_z <= 80} M104 S220
{elsif layer_z <= 90} M104 S225
{elsif layer_z <= 100} M104 S230
{elsif layer_z <= 110} M104 S235
{else} M104 S240
{endif}
; for PETG
;TEMP TOWER
{if layer_z <= 10} M104 S205
{elsif layer_z <= 20} M104 S210
{elsif layer_z <= 30} M104 S215
{elsif layer_z <= 40} M104 S220
{elsif layer_z <= 50} M104 S225
{elsif layer_z <= 60} M104 S230
{elsif layer_z <= 70} M104 S235
{elsif layer_z <= 80} M104 S240
{elsif layer_z <= 90} M104 S245
{else} M104 S250
{endif}
; for PA
;TEMP TOWER
{if layer_z <= 10} M104 S230
{elsif layer_z <= 20} M104 S235
{elsif layer_z <= 30} M104 S240
{elsif layer_z <= 40} M104 S245
{elsif layer_z <= 50} M104 S250
{elsif layer_z <= 60} M104 S255
{elsif layer_z <= 70} M104 S260
{elsif layer_z <= 80} M104 S265
{elsif layer_z <= 90} M104 S270
{elsif layer_z <= 100} M104 S275
{else} M104 S280
{endif}