Mike Wazoski themed Bike Valve Cap (Schrader)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shrader type Valve Cap for bike Multi color via layer change, no MMU required
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I created these for a Monster's Inc. fan's bicycle.
Printed with 25% fill and 0.2mm layer height. To get the color changes, I sliced with layer changes at 3.2mm, 15mm, 18.2mm, and 19.4mm to get the color effect and give the eye its look. I used (in order): Black, Green, White, Blue, Black (again).
The fit on the valve can be tight, depending on printer tolerances. If it is too tight, scale up the whole model a little bit, if too loose, scale down a little. I did upload a 3mf file (MikeWValve_103pct.3mf) with the stl scaled up to 103% to account for tolerances in my printer. The printed result seemed to be a good balance of fit without being loose for my printer.