Mike Wazoski themed Bike Valve Cap (Schrader)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shrader type Valve Cap for bike Multi color via layer change, no MMU required
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 38
- Makes
- 0
- Views
- 419
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I created these for a Monster's Inc. fan's bicycle.
Printed with 25% fill and 0.2mm layer height. To get the color changes, I sliced with layer changes at 3.2mm, 15mm, 18.2mm, and 19.4mm to get the color effect and give the eye its look. I used (in order): Black, Green, White, Blue, Black (again).
The fit on the valve can be tight, depending on printer tolerances. If it is too tight, scale up the whole model a little bit, if too loose, scale down a little. I did upload a 3mf file (MikeWValve_103pct.3mf) with the stl scaled up to 103% to account for tolerances in my printer. The printed result seemed to be a good balance of fit without being loose for my printer.