Solder Spool Holder for Honeycomb Storage Wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Put your solder on the wall, and still be able to see which is which.
- Ocena
- 5 / 5
- Polubienia
- 86
- Pobrania
- 324
- Wydruki
- 3
- Wyświetlenia
- 1219
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple design to hang your spools of solder on your Honeycomb Storage Wall, without taking up too much plastic or space.
Known Compatibility:
Using my referral links helps keep me publishing free designs for everybody to enjoy, or feel free to leave me a tip on my Ko-fi if you like my designs.
Originally designed to hold my spools of Solder, the 3mm variant holds my Yihua Lead Free Solder spools, but will hold most spools that have a 2-2.5mm thick side-wall on the spool, and diameters between 50 and 65mm.
The 6mm variant holds my 8oz spool of Sterling Solder, and works for the same 50-65mm diameter range.
The height of the spool doesn't matter, as it just holds onto one wing of the spool, but the weight of the spool might - I don't have a 1lb spool of solder to test compatibility with right now, so YMMV.
Both of these models need one “insert-empty” from the original HSW models. (download link)
About this model:
The dimension in the model name is about how deep the lip on the part is, and the other major dimensions are shown in the images.
If you have a spool of solder with a different lip thickness, just leave a comment and I can make a new version of this model to fit your needs.
Print it with 2+ walls and 0.2mm layer height. Prints in ~20 minutes, plus the empty insert to mount it.