Philips Sonicare wall mount with charger

This is a double charger wall mount for the Philips Sonicare electric toothbrushes. There are also 2 draining holes for each slot of the chargers, in case any water is trapped there.

It was made by myself from scratch, but I was inspired by this design: https://www.thingiverse.com/thing:1824210/

I made the extension that glues to the wall a little longer, because I needed clearance for my bathroom mirror (see pictures attached). This also made possible hiding the rest of the cables pretty easy.

For mounting the 2 parts, you just need 2 screws. The wholes are 3mm in diameter, with a wider space for the head of the screw, so it can sit flush.

For mounting the assembly to the wall, I used double sided adhesive stripes, that are normally used to attach bathroom mirrors or orther stuff. If you want to screw it, then you can just edit the files and put holes in it.

If your printer settings and tolerances are good, the charger should slide in with a bit of a push, then click in position. To make sure it's fitted, put some pressure on all of the charger's sides to tuck it in the slot.

This was made for Philips Sonicare chargers. I don't know if it works for other types of chargers. If they have the same dimensions, it will work.

Sorry if the orientation of the STLs is not correct. This is how SolidWorks spat it out.