Collar Stays (Parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collar stays in common sizes. Parametric model for customization or less common sizes.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Men
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In need of a replacement collar stay for your shirt?
This is a set of collar stays in the most common sizes I have encountered. These print quickly if you have an immediate need for a collar stay.
The following sizes are pre-made (L x W). Note: all are 0.6mm thick.
| File Name | Metric Size | U.S. Equivalent (Approximate) |
| Collar Stay 57 x 7.7mm.stl | 57 x 7.7mm | 2 ¼" x 5/16" |
| Collar Stay 63.5 x 7.7mm.stl | 63.5 x 7.7mm | 2 ½" x 5/16" |
| Collar Stay 70 x 7.7mm.stl | 70 x 7.7mm | 2 ¾" x 5/16" |
| Collar Stay 57 x 9.6mm.stl | 57 x 9.6mm | 2 ¼" x 3/8" |
| Collar Stay 63.5 x 9.6mm.stl | 63.5 x 9.6mm | 2 ½" x 3/8" |
| Collar Stay 70 x 9.6mm.stl | 70 x 9.6mm | 2 ¾" x 3/8" |
I have provided the CAD file if you need a uncommon size or make other customization. The file is parametric, just change the dimensions in the parameters.
I got two layers of PLA with 0.2mm layer height and three layers with 0.12mm layers. Both had 0.2mm for the base layer.
Note: I would remove these before ironing the collar of the shirt. I doubt PLA would like iron temperatures and it could melt into the fabric.
Print Settings
Printer: Ender 3 Pro w/ Micro Swiss direct drive
Material: PLA or PETG (pretty much anything stiff should work)
Rafts: No
Supports: No
Resolution: 0.12-0.2mm
Infill: Not applicable due to thickness
Shells: 2+