Collar Stays (Parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Collar stays in common sizes. Parametric model for customization or less common sizes.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Men
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
In need of a replacement collar stay for your shirt?
This is a set of collar stays in the most common sizes I have encountered. These print quickly if you have an immediate need for a collar stay.
The following sizes are pre-made (L x W). Note: all are 0.6mm thick.
| File Name | Metric Size | U.S. Equivalent (Approximate) |
| Collar Stay 57 x 7.7mm.stl | 57 x 7.7mm | 2 ¼" x 5/16" |
| Collar Stay 63.5 x 7.7mm.stl | 63.5 x 7.7mm | 2 ½" x 5/16" |
| Collar Stay 70 x 7.7mm.stl | 70 x 7.7mm | 2 ¾" x 5/16" |
| Collar Stay 57 x 9.6mm.stl | 57 x 9.6mm | 2 ¼" x 3/8" |
| Collar Stay 63.5 x 9.6mm.stl | 63.5 x 9.6mm | 2 ½" x 3/8" |
| Collar Stay 70 x 9.6mm.stl | 70 x 9.6mm | 2 ¾" x 3/8" |
I have provided the CAD file if you need a uncommon size or make other customization. The file is parametric, just change the dimensions in the parameters.
I got two layers of PLA with 0.2mm layer height and three layers with 0.12mm layers. Both had 0.2mm for the base layer.
Note: I would remove these before ironing the collar of the shirt. I doubt PLA would like iron temperatures and it could melt into the fabric.
Print Settings
Printer: Ender 3 Pro w/ Micro Swiss direct drive
Material: PLA or PETG (pretty much anything stiff should work)
Rafts: No
Supports: No
Resolution: 0.12-0.2mm
Infill: Not applicable due to thickness
Shells: 2+