1 / 2
Scary Halloween Mansion (Filament Painting) - HueForge — zdjęcie 1
1 / 2

Scary Halloween Mansion (Filament Painting) - HueForge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament painting made using HueForge - Filament swaps ONLY, no MMU or AMS required.

Ocena
5 / 5
Polubienia
90
Pobrania
290
Wydruki
6
Wyświetlenia
1643
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Scary Halloween Mansion - HueForge.

Printing instructions:

Filament swaps ONLY, no MMU or AMS required.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm.

You can use same filaments as I did or you can experiment with your own.

Don't forget to upload a make!

Filaments Used:
  • PLA BambuLab Basic Black Transmission Distance: 0.6
  • PLA BambuLab Basic Blue Gray Transmission Distance: 3
  • PLA Gratkit Gray Transmission Distance: 1
  • PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
  • Start with Black
  • At layer #20 (1mm) swap to Blue Gray
  • At layer #35 (1.6mm) swap to Gray
  • At layer #38 (1.72mm) swap to White for the rest.

Tagi