1 / 2
Scary Halloween Mansion (Filament Painting) - HueForge — image 1
1 / 2

Scary Halloween Mansion (Filament Painting) - HueForge

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Filament painting made using HueForge - Filament swaps ONLY, no MMU or AMS required.

Rating
5 / 5
Likes
90
Downloads
290
Makes
6
Views
1,643
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Scary Halloween Mansion - HueForge.

Printing instructions:

Filament swaps ONLY, no MMU or AMS required.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm.

You can use same filaments as I did or you can experiment with your own.

Don't forget to upload a make!

Filaments Used:
  • PLA BambuLab Basic Black Transmission Distance: 0.6
  • PLA BambuLab Basic Blue Gray Transmission Distance: 3
  • PLA Gratkit Gray Transmission Distance: 1
  • PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
  • Start with Black
  • At layer #20 (1mm) swap to Blue Gray
  • At layer #35 (1.6mm) swap to Gray
  • At layer #38 (1.72mm) swap to White for the rest.

Tags