Nespresso Vertuo Pod Holder for CR-30
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 5 Vertuo coffee pods and meant to be printed on the CR-30.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 1088
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another Nespresso Vertuo coffee pod holder, made for 11.5" cupboards.
Story: My partner and I like using our Nespresso machine but didn't have space to put the sleeves in our cupboards nicely. We wanted to have them out and tucked away close to our machine but not be a complete eyesore. This gave me an excuse to use my CR-30 which I bought on impulse for this project and I have justified its stay in the apartment!
Note: I did not compensate for the grout underneath the cupboard, so you can scale the model to 11 inches or to whatever depth the underside of your cupboard is.
Printing: With the CR-30, it's as simple as putting it on the bed and printing it. Printable with a 0.8mm nozzle at a 0.4mm layer height, no supports needed.
As for standard printing, support will be required for the lips that hold the pods in place. Standard 0.2mm layer height with 3 walls will be enough, infill is negligible.