1 / 2
Star Bike Handle Grip for 22mm scooter handle bars
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Star pattern grips for bicycle or scooter. 22mm inside diameter. print in TPU
- Ocena
- 4,75 / 5
- Polubienia
- 20
- Pobrania
- 180
- Wydruki
- 4
- Wyświetlenia
- 889
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (0)Kolekcje (30)Powiązane
My Daughter requested star pattern grips, so I made some.
Printed in TPU, with the hole in them for tassels!
Fits the standard bike handle bars. but you can scale them to fit yours.
a good test is to just lower it through the bed before you slice, so you just print a test ring, and see if it fits on easily. Not loose, but not much stretch or you'll never get the full one on.
3 Perimeters
0.2mm layers