Olfa / Milwaukee Snap Away Knife Replacement Slider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for Milwaukee Snap-off Olfa style utility knife/box cutter. Printable in 15 mins without support!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I've lost probably every part of these blade holders at some point in time, but never found a printable replacement for the slider only the knob. So, I made one…
- No supports needed!
- Print at 0.2mm layer height or finer
- 4+ outer walls
Mine was printed on a Prusa Mini+ with 0.6 nozzle
Replacement for slider mechanism in snap-off utility knife. Since these blades are all 18mm wide this will likely work in many different blade holders from many different companies!
The slider and bolt gets smoother with use. Modify the hole for up to an M4.5 heat set insert for more reliable performance.