1 / 2
TPU feet for the IKEA Nisse Chair — zdjęcie 1
1 / 2

TPU feet for the IKEA Nisse Chair

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

bigger and softer feet to replace the small original feet, that scratch the floor

Ocena
0 / 5
Polubienia
1
Pobrania
34
Wydruki
0
Wyświetlenia
258
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This are new feet printet in TPU for the IKEA Nisse Chair.

https://www.ikea.com/at/en/p/nisse-folding-chair-black-30115066/

 

The original feet are very small and can damage the floor or break off!
So I designed this larger ones, that can put on the tube of the chair in each corner, after removing (pull out) the original feet.

To prevent them from spinning around, you can glue them on.

I have printed them in TPU Shore 95A

Tagi