Flying Spaghetti Monster Bag Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bag clip for fans of His Noodleness.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This is TimLParis' Ultimate Bag Clip (https://www.thingiverse.com/thing:1394257), with tosjduenfs' Flying Spaghetti Monster (https://www.thingiverse.com/thing:576713) design imprinted on the face. The spring file is unmodified from the original, but included here for completeness. All credit to the original sources, I just stuck 'em together.
Print Settings
Printer Brand: SeeMeCNC
Printer: Rostock MAX v2
Rafts: No
Supports: No
Resolution: 0.2mm high by 0.3 mm wide
Infill: 15% for body, 50% for springs.
Notes:
Print two clips and two springs. Put the two clip halves together so their hinges mesh, and then press a spring onto each side until it clicks into the little indentation.
I printed the clip body in PLA, and the springs in ABS, which makes them a little more durable in use. They will eventually crack and break, however. Maybe nylon would be better?
Category: Kitchen & Dining