Frameless hanger for art cards and prints
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by anoved's Frameless Hanger for 3/16" Foam Core, this is a miniature version for 1mm or less thick art cards…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
Inspired by anoved's Frameless Hanger for 3/16" Foam Core (https://www.thingiverse.com/thing:963747), this is a miniature version for 1mm or less thick art cards and art prints. Print 4 corners, tie them together with string, and use to hang the cards.
I've included the OpenSCAD file used to create these, but note it is not parametric - any changes you make will likely require further tweaks to make everything work out.
Important: Do not put pressure on the loops when tying the string, they are liable to break off, and the cardstock will deform under tension anyway.
Print Settings
Printer Brand: SeeMeCNC
Printer: Rostock MAX v2
Rafts: No
Supports: No
Resolution: 0.3
Infill: 100%
Notes:
Print these vertically without support. I used a skirt to help hold the objects to the bed and that worked fine. A full brim that includes the interior area requires too much post-processing clean-up.
Category: Art Tools