Frameless hanger for art cards and prints
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by anoved's Frameless Hanger for 3/16" Foam Core, this is a miniature version for 1mm or less thick art cards…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 25
- Makes
- 0
- Views
- 305
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution
Inspired by anoved's Frameless Hanger for 3/16" Foam Core (https://www.thingiverse.com/thing:963747), this is a miniature version for 1mm or less thick art cards and art prints. Print 4 corners, tie them together with string, and use to hang the cards.
I've included the OpenSCAD file used to create these, but note it is not parametric - any changes you make will likely require further tweaks to make everything work out.
Important: Do not put pressure on the loops when tying the string, they are liable to break off, and the cardstock will deform under tension anyway.
Print Settings
Printer Brand: SeeMeCNC
Printer: Rostock MAX v2
Rafts: No
Supports: No
Resolution: 0.3
Infill: 100%
Notes:
Print these vertically without support. I used a skirt to help hold the objects to the bed and that worked fine. A full brim that includes the interior area requires too much post-processing clean-up.
Category: Art Tools