Lap Monitor Transponder and Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed in Fusion 360 to hold a small LiPo battery and a Lap Monitor transponder for a Traxxas Slash 2WD
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is one of my first designs that I made to print in Fusion 360. It is designed to bolt around the front body mount posts of a Traxxas Slash 2WD R/C car. I printed it using PLA but you can use a more resilient filament if you desire. The bolt holes are for a 8/32" machine bolt. The battery is held in by a thin tab and a body mount cotter pin is used to hold the tab. I included the Fusion 360 file if you want to customize it. The transponder is from Lap Monitor and it just sets in the frame. I used a drill to make a hole in the hood of the R/C car body so the IR sensor protrudes out.
