Lap Monitor Transponder and Battery Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed in Fusion 360 to hold a small LiPo battery and a Lap Monitor transponder for a Traxxas Slash 2WD
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 0
- Views
- 409
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is one of my first designs that I made to print in Fusion 360. It is designed to bolt around the front body mount posts of a Traxxas Slash 2WD R/C car. I printed it using PLA but you can use a more resilient filament if you desire. The bolt holes are for a 8/32" machine bolt. The battery is held in by a thin tab and a body mount cotter pin is used to hold the tab. I included the Fusion 360 file if you want to customize it. The transponder is from Lap Monitor and it just sets in the frame. I used a drill to make a hole in the hood of the R/C car body so the IR sensor protrudes out.
