1 / 3
El reino de los malditos - Kingdom of the Wicked - Hueforge — zdjęcie 1
1 / 3

El reino de los malditos - Kingdom of the Wicked - Hueforge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Portada del libro “El reino de los malditos” de Kerri Maniscalco. Kingdom of the Wicked.

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
161
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Portada del libro “El reino de los malditos” de Kerri Maniscalco. La imagen está sacada de internet y pasada por HueForge.

El diseño es de mi hija, fan de la serie. Buen trabajo!!

Las marcas de los filamentos usadas en el modelo impreso no son las especificadas en las intrucciones de Hueforge, ya que uso otras diferentes, aunque los colores son similares.

Altura 230 mm. Ancho 145,76mm.

----------

Cover of the book “The Kingdom of the Damned” by Kerri Maniscalco. The image is taken from the internet and passed through HueForge.

The design is from my daughter, a fan of the series. Good job!!

The filament brands used in the printed model are not those specified in the Hueforge instructions, since I use different ones, although the colors are similar.

Height 230mm. Width 145.76mm.

----------

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA PolyLite Pro Purple Transmission Distance: 1
PLA PolyLite Lemon Yellow Transmission Distance: 6.5
PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Purple
At layer #8 (0.72mm) swap to Lemon Yellow
At layer #18 (1.52mm) swap to White for the rest.

Tagi