1 / 3
Headphone holder with headphone output (for 3.5 mm jack)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Headphone holder with output. For mounting under the table.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Headphone holder
with headphone output for 3.5 mm jack. Click here for the 6.3 mm version.
Components you need:
- 1 x Jack Plug
- 1 x Jack socket
- 2 x Screws
- Cable (diameter about 3 mm)
Guide
- Define holder position and cable length.
- Plug in headphone jack and tighten.
- Pull the cable through the hole in the back and solder it (socket and plug on the other end of the cable).

- Screw on the holder.
- Arrange cable